Tsunami CMM Air Filters | CMM Air Filtration Systems

Poor air quality is one of the leading causes of CMM performance issues. If your company uses coordinate measuring machines, then quality CMM air filters are one of the most important investments you can make. A CMM running on humid, contaminated compressed air will not run optimally. Dry, particle-free compressed air will aid your CMM in flawless operation for decades.

Having the proper CMM air filters and air filtration equipment quickly pays for itself by:

  • Reducing Downtime & Expensive Repairs
  • Providing Optimal Accuracy via Smoother Operation
  • Increasing the Lifespan of Your CMM

Tsunami CMM Air Filters: The Leader in CMM Air Filtration

The Core Technology of the Tsunami CMM Air Filtration System sets it apart from other manufacturers by eliminate contaminants, water, and oil from your compressed air system. Compare Tsunami CMM air filters vs. the competition to see how its superior construction provides superior performance.

Take a look at the table below to compare Tsunami air filter technology vs. the competition:

Filter ConstructionAnodized, corrosion-resistant 6061
aircraft aluminum
Die-cast aluminum, which is prone to
Water SeparationUp-flow gravity to provide
consistent flow
Intermittent, centrifugal motion that
allows moisture into air lines
Barrel & Bottom CapCollects below float line, extending
Plugs easily and requires frequent
DrainBuilt-in strainer; Optional solenoid
drain for superior performance
Manual drains that are expensive
to replace and labor-intensive

Featured Tsunami Air Filtration Systems

Not sure what setup is best for your CMM? Browse a few of our featured coordinate measuring machine air filter systems to see our recommended Tsunami air filtration systems for our AccuFLEX CMMs.

3-Stage Filtration Package 20 & 3-Stage Filtration Package 50


  • Water Separator
  • Oil coalescing filter
  • Activated carbon filter
  • Regulator
  • Multiple drain options
  • Starting at $665

SKU: 21999-0678 & 21999-0257

Tsunami Pure Regenerative Air Dryer – 40 CFM

CMM air filters with regenerative air dryer



  • 2-Stage pre-filtration
  • Water separator & oil coalescing filter
  • Regenerative air drying system
  • Solenoid valve timer
  • Automatic drains
  • Available heating pads
  • Starting at $2881

SKU: 21999-1010

3-Stage Membrane Air Dryer – 15+20 CFM

CMM Air Filters and air dryer


  • Water separator
  • Oil coalescing filter
  • Activated carbon filter
  • Regulator & mounting bracket
  • Starting at $1992

SKU: 21999-0957 & 21999-0524

Pure 5 Series Regenerative Dryer with Pneumatic Drain


  • 2-Stage Pre-filtration
  • Water separator
  • Oil coalescing filter
  • Regenerative air dryer
  • Solenoid valve timer
  • Automatic drains
  • Starting at $2113

SKU: 21999-1105-T-MM

Air Monitoring Equipment

Monitoring Equipment for:

  • Airflow
  • Humidity
  • Temperature
  • Dew Point
  • Starting at $802

SKU: 21999-0938 / 21999-0440 / 21999-0447 / 21999-1045

Tsunami CMM Air Filter Maintenance Kit

CMM air filter replacement cores


  • Biannual coalescing filter replacement(s)
  • Biannual activated carbon element replacement(s)
  • Replacement O-Rings
  • Starting at $184

SKU: 21999-0818 / 21999-0819 / 21999-0355

Dynamic CMM Air Filters that Deliver Improved Performance

With its 50 SCFM Rated Flow, Tsunami CMM air filters are capable of handling up to one quart of oily water per minute! But how can these new CMM air filters offer the performance you need with superior efficiency? Learn more about what makes Tsunami CMM machine filters the right choice.

Filter Construction

The head is machined from 6061 aircraft aluminum and is anodized and powder coated for maximum corrosion protection.

Water Separation

Up-flow gravity separation allows peak performance at all times with all flows. But how does this CMM air filter technology work? Air flows through the central air channel tube toward the bottom of the Tsunami Water Separator, then enters the baffle plate. This baffle deposits liquid and particulate into the large drain sump and away from your airlines.

Air is then redirected 180º and flows through the oversized stainless steel mesh element, where any remaining water droplets and aerosols are filtered down to 10 microns. Any liquid and particulate are then forced outside and into the drain sump. After this first stage, the oil coalescing filters remove oil aerosols down to .001 ppm and particulate down to .01 microns. From here, the carbon filter filters out oil vapors down to .003 ppm.

Barrel and Bottom Cap

Tsunami engineers their air filtration units to offer superior reliability and performance, machining them from anodized 6061 aircraft aluminum to maximum corrosion resistance. Oversized length and diameter allow for a large drain sump, which can handle large surges of oily water. Furthermore, the elevated sump is designed to allow sediment to accumulate below the float drain, extending its overall longevity.

Optional Electronic Solenoid Drain

A standard thread on the cap allows for the installation of an optional electronic solenoid drain – ideal for extremely dirty and especially oily systems. Tsunami CMM air filters and filtration systems equipped with this optional feature offer a straightforward service procedure due to its convenient design. The built-in strainer also includes a ball valve for manual draining, allowing users to help flush debris through the built-in strainer screen on-demand.

Order Tsunami CMM Air Filters at Made to Measure

Made to Measure is always prepared to provide metrology solutions for manufacturers and brands of all sizes. Whether you’re looking for metrology service, measuring equipment, or CMM machine accessories, we’re standing by to ensure your team gets the accurate measurements you need to succeed.

When you need CMM air filters, you can trust Made to Measure to get exactly what you need to ensure CMM machine longevity: Tsunami air filtration systems! Don’t hesitate to contact us online to order the metrology equipment you’re looking for.